Have you gathered all your notes when it comes to ink refilling? Are you ready to start the job? Well, if you are, then it is wise to assume that the job will be done successfully. But, you may have forgotten one thing. You must also have your pointers on troubleshooting ink refill problems.
Troubleshooting ink refills is important. This is because you never know what will happen in the course of doing the job. While you have decided to save money by doing the refilling of the cartridge on your own, you should also think of how to make out of the investment you make. Otherwise, the inks you have ordered online may be put to waste.
Troubleshooting ink refill problems
There are different signs of bad ink refilling. One is that part when you encounter ink leakage while refilling empty cartridges. Another is when the cartridge does not print when you are using them. These things may actually result from different causes such as overfilling of the cartridge or dried nozzles. Here are things you may do then:
1. Go through the print head cleaning process. It is important to run this part of the printer to check what is wrong. If this process does not work, it is best to inject air on top of the cartridge. Do this with the aid of your refill syringe. Both these steps are essential in cleaning the nozzles to ensure that they are freed from dried inks.
2. You may also wash the nozzles of the cartridge. You must be very careful in doing this task so as not to mix water with the ink on your cartridges. First, you must remove the newly injected ink. After which, soak the nozzle in warm water. From this process, you will notice that dried ink will come out of the nozzle. If after doing this task and the printer will not yet print, then you may leave the cartridge sitting overnight on a tissue paper.
3. If the new ink refill produces poor ink quality, you must remove some ink on the nozzle. Again, use your refill syringe to do this process. Just make sure that there is no air interfering as you do this part. Once you have done this, you are about ready to reinstall the printer ink cartridge. Check if it prints.
4. If your main problem is brought about by leakages on the cartridge, this may be caused by overfilling. This may also result if you did not insert the needle properly during the ink refill process. What you need to do is to allow excess ink to flow into a cloth or a tissue paper.
5. Check if the rubber stopper is plugged in properly into the refill hole. If you notice that it is plugged correctly, then there is something wrong with the bag found inside your cartridge. In this case, ink refills will no longer be a solution to your problem. What you should do is to have the whole cartridge replaced.
If you want to avoid these troubleshooting processes when doing an ink refill, you should make sure that you follow the refilling instructions accordingly. However, let the problems be your learning lessons. Utilize them in order to go on with your next refilling job successfully. If in case the ink refills you ordered are the ones causing the damage, ask the online service provider for some help.