Refill Ink Cartridge Instructions » ink cartridge refill

When Refilling Ink Cartridges, Make Sure To Clean The Print Head

Ink Cartridges — Tue, 15 Dec 2009 05:09:45 +0000

When you reuse your printer ink cartridges, you’ll be using the same casing over and over again to house the printer ink that you print with. This means that a great deal of ink is going to be passing through the unit itself and as a result, some of that ink may start to dry on the print head and nozzle of the printer cartridges. Cleaning this dry printer ink out should be able to restore your printer ink cartridge to a fully functional state once more. You will need to be very careful about how you do this, however, so that you do not damage the printer ink which you just put into your recycled printer ink cartridge.

Start by running the print head cleaning process on your printer itself. This can help to restore your printer itself to a clean state which is going to allow the best printing. If you find that you’re still having problems with getting your printer to work properly, there could be dry printer ink within the nozzle of your printer ink cartridges. Very carefully remove the nozzle from your printer ink cartridge and soak it in warm water. Thoroughly dry it on a paper towel before you reattach it to your printer ink cartridge. If you do this correctly, your refilled printer ink cartridge should quickly be able to work again and you will have a fully functional printer to use.

How Often Will You Be Able To Refill The Same Cartridge?

Ink Cartridges — Tue, 15 Dec 2009 04:11:09 +0000

Refilling your printer ink cartridges is a quick and simple way to maximize the usability of the printers which you use. Instead of having to unnecessarily spend exorbitant amounts of money on buying new and expensive printer ink cartridges on a regular basis, you can follow some guided instructions and refill printer ink cartridges on your own, allowing you to use it over and over again. The only trick comes into play with the fact that printer ink cartridges can only be refilled a certain number of times before they stop working properly.

This means that you will always need to take care to count the number of times in which you actually refill a printer ink cartridge. If you expect to get the greatest amount of life out of your cartridges, you will want to always treat them very delicately. This will include remembering the number of times which you refill it. Refill your printer ink cartridge too often and you will damage the unit and waste ink. Some sources will recommend that you only refill a printer ink cartridge twice before disposing of it, while other people will tell you that you can successfully refill a printer ink cartridge up to 6 times before it needs to be disposed of. As long as you are always careful about what you are doing, you should be able to get a longer lifespan out of all of your cartridges.

Why is Refilling Your Own Ink Cartridges a Smart Idea?

Ink Cartridges — Tue, 15 Dec 2009 04:06:57 +0000

You will want to consider performing your own printer ink cartridge refills when you decide that you need to start finding ways to cut back and start saving money with all of your regular expenditures. If you do a lot of printing, printer ink cartridge refills can be one of the most expensive things that you spend money on, which is why you will need to look into how refilling your own printer ink cartridges can be a smart idea. Although it is a very delicate process, it is one that will give you the best chance of saving a great deal of money over a long period of time.

There are a number of resources which you could turn to when you are looking for the best way to refill your own printer ink cartridges. There are plenty of websites online which can guide you through the process, some of which even provide video directions. Finding a website that provides video directions can be especially helpful as you will get step by step directions as to what you need to do. You could also turn to the brand manufacturer yourself for directions on how to refill the printer ink cartridges, although very often, you will find the brand will be more interested in selling you a new printer ink cartridge over helping you replace yours. With a little patience, however, you should be able to soon refill your printer ink cartridges and start saving money!

Lexmark Printer Ink Cartridge Refill Instructions

Ink Cartridges — Sat, 12 Dec 2009 01:50:18 +0000

Refill Instructional Video

Color Cartridges

1. To locate the filler holes of the printer ink cartridge you must remove the plastic cover. this cover must be removed before refilling by carefully prying it off with a thin metal blade such as a utility knife. Important: Make certain not to damage the sensors on the back of the cartridge.

2. Attach the needle to the syringe and fill with the correct color ink.

3. Insert the filling needle into the corresponding hole of the color to be refilled, (see diagram above) and push a far down into the cartridge. Note: You may a feel slight pressure because the cartridge contains a sponge.

4. Inject approximately 8 ml. of ink slowly or until the sponge is soaked. Important: The sponge inside is white. And in order to prevent overfilling the cartridge do not change the color of the sponge to the color you are filling. When the ink begins to surface where the needle is inserted, stop filling, the cartridge is full.

5. Rinse the syringe and needle with water and dry between each color refilling or store for further use.

6. The top can be held in place with adhesive tape after refilling.

Black Cartridges

1. Using an eyelet screw or a sharp object, enlarge the filling hole. (Do not remove the top).

2. Fill the syringe with ink, insert the filling needle into the filling hole and push as far down the black printer cartridge as it will go. Inject approximately 20 ml. of ink slowly or until the reservoir is full.

Source: xrefill.com

Dell A720 Ink Cartridge Refill Instructions

Ink Cartridges — Sat, 12 Dec 2009 01:46:14 +0000

Dell A720 Ink Cartridge Refill Instructions
If refilling the color black ink cartridge enlarge the hole on top of the cap with the drill provided.
If you are refilling the color ink cartridge, the cap must be removed first. Either hold the cap in a vice and snap off, or carefully lever off the cap with a penknife.
Assemble the syringe and needle, pierce the bottle seal and fill with the correct color ink
Insert the needle down into the fill hole, if filling with color ink ensure that you put the needle into the correct color chamber.
Slowly inject the ink. During filling you may need to blot the printhead with a tissue.
When the color ink cartridge is full ink appears at the fill hole, draw back the syringe plunger slightly until the ink disappears. Clean the syringe and needle thoroughly with water before filling with the next color ink.
The color black ink cartridge holds approximately 20ml of ink. Do not fill with more than this amount.
After refilling refit the lid. The best way to secure the lid is to stick tape from one side over the top and down the other side.

10. Note do not use a sealing plug with this cartridge.

11. Install the cartridge and run the cleaning cycle on the printer.

12. Clean the syringe and needle with water for future use.

Source: refillinkcartridges.co.uk

How to Refill Xerox Dry Toner Cartridges

Ink Cartridges — Sat, 12 Dec 2009 01:39:46 +0000

XEROX REFILL VIDEO INSTRUCTION

Prepare your work surface by spreading out the newspapers. Place your tools and supplies on top of the newspaper. Be sure to choose a work surface where you will have ample room. If you must work in a carpeted area, spread the newspapers over the carpet under the work surface, too.
Shake the black refill toner container several times. Unscrew the cap and pop open the aluminum safety seal using the screw driver. Screw on the funnel top that came with the refill toner.
Locate the rubber stopper on the Xerox toner cartridge. With the hopper cylinder portion of the printer ink cartridge facing up, the small rubber stopper can be found on one of the ends of the printer ink cartridge.
Pry the rubber stopper that covers the refill hole off of the cartridge by inserting the flat head screw between the lip of the stopper and the printer ink cartridge. Gently work the screwdriver around the stopper until it becomes loose. Put the stopper to the side.
Stand the cartridge on end with the refill hole facing up.
Insert the funnel on the refill Xerox toner container into the refill hole on the printer ink cartridge. Slowly empty the toner into the cartridge.
Insert the rubber stopper into the Xerox toner cartridge, making sure that it is securely in place.
Insert the Xerox toner cartridge back into the Xerox copier. The copier will automatically readjust the toner settings
Discard the newspapers carefully avoiding spilling any printer toner which may have spilled. Wash your hands immediately after working with toner powder.

Source:.ehow.com

8 Steps of Canon Ink Cartridge Refill

Ink Cartridges — Sat, 12 Dec 2009 01:33:36 +0000

Step 1) Put the printer ink cartridge on some paper towels in an area where you can tolerate a spill.

Step 2) Look at the printer ink cartridge. This cartridge has two chambers. The Lower chamber is filled with a sponge. The Upper chamber is an empty ink reservoir.

Step 3) Put enough ink in the Lower chamber to saturate the sponge by injecting some ink through the ink exit hole on the bottom of the printer ink cartridge. Be sure that you do not push the sponge into the cartridge, or it will not make proper contact with the printhead when installed in the printer.

Step 4) Temporarily tape over the ink exit hole to keep the ink from dribbling out.

Step 5) Make a hole (by drilling or melting)into the Upper chamber. We suggest making the hole on the top of the printer ink cartridge.

Step 6) Inject ink into this new hole to fill the Upper chamber.

Step 7) Seal the new hole air tight using hot glue or black electrical tape. Do not use ordinary masking tape, duct tape, or scotch tape, since these will not make an air tight seal.

Step 8) Remove the temporary tape on the printer ink exit hole and insert in the printer.

Source: oddparts.com

HP 56 Ink Cartridge Refill

Ink Cartridges — Sat, 12 Dec 2009 00:38:27 +0000

The ink in this printer ink cartridge is retained because the cartridge has an internal sponge. This printer ink cartridge is physically identical with the #27 C8727AN cartridge. HP puts less ink into the other printer ink cartridge when new.

HP 56 REFILL INSTRUCTION

Step 1) Put the printer ink cartridge on some paper towels in an area where you can tolerate a spill.

Step 2) Remove the label on the top of the printer ink cartridge. You will find 5 holes.

Step 3) Put the holes on top of the printer ink cartridge. Turn the cartridge so that the single hole is farthest away from you and the other 4 holes are closest to you. You may fill through any of the following holes:

The single hole farthest from you.
Either of the two holes closest to you.

Step 4) Keeping the printer ink cartridge on paper towels, take a syringe bottle and fill it 1/2 full of ink — about 15 ml. When new, the cartridge holds 19 ml. When full, the printer ink cartridge holds 19 ml.

Step 5) Insert the needle fully into the hole. Get the tip of the needle to the bottom of the cartridge. Inject the ink very S-L-O-W-L-Y and watch until the sponge is saturated. You must get the needle deep into the hard sponge.

Step 6) It is not necessary to reseal the holes.

Step 7) Set above a paper towel for an hour as a drip precaution, perhaps over a small cup. Expect a few drips. Do not allow the printer ink cartridge to touch the paper towel at this point, since the towel will draw out the printer ink.

Step 8) For best results, let sit overnight before using. Tape over the vent holes if you plan to store for awhile to prevent drying out of the ink.

Source: oddparts.com